[2022 updated] Share the latest Cisco 300-425 dumps and exam exercise questions and answers

Cisco cisco 300-425 cisco 300-425 dumps cisco 300-425 exam cisco 300-425 exam questions cisco 300-425 pdf Cisco CCNP Enterprise Exam certification 2020 Designing Cisco Enterprise Wireless Networks

How do I pass the Cisco CCNP 300-425 exam?

Passing the first exam with Cisco 300-425 is not an easy task!
Follow Examthings Cisco Blog! Share the latest and most effective exam tips for free.

Examthings shares the latest exam questions and answers throughout the year. Cisco 300-425 exam “Designing Cisco Enterprise Wireless Networks”.
Examthings shares the latest Cisco 300-425 exam pdf, 300-425 exam practice questions, and the latest questions to help you improve your exam pass rate!

We prepared the Cisco 300-425 highest exam pass secret, 300-425 Dumps:https://www.leads4pass.com/300-425.html. latest and most complete Cisco 300-425 exam dumps.

Examthings 300-425 exam catalog

[2022 Updated]Examthings Cisco 300-425 video tutorial

Latest Cisco 300-425 exam pdf free download

[PDF Q1-Q12] Free Cisco 300-425 pdf dumps download from Google Drive: https://drive.google.com/file/d/115BAw_fNYCPCJi6wFjTK7_8axM7iSyxx/

[2022 updated]: https://drive.google.com/file/d/1gKXKHr_qnSyocSJs34EbGFVBsRdmRSlf/

Designing Cisco Enterprise Wireless Networks (ENWLSD) v1.0: https://www.cisco.com/c/en/us/training-events/training-certifications/training/training-services/courses/designing-cisco-enterprise-wireless-networks-enwlsd.html

The Designing Cisco Enterprise Wireless Networks (ENWLSD) v1.0 course gives you the knowledge you need to design Cisco® wireless networks. The course covers design specifics from scenario design concepts through the installation phase and into post-deployment validation.

This course, including the self-paced material, helps prepare you to take the exam, Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD), which leads to the new CCNP® Enterprise and Cisco Certified Specialist – Enterprise Wireless Design certifications. The exam will be available beginning February 24, 2020.

[2022 Updated]: Cisco 300-425 free dumps

QUESTION 1:

A wireless engineer is using an Ekahau site survey to validate that an existing wireless network is operating as expected, which type of survey should be used to identify the end-to-end network performance?

A. GPS assisted
B. Spectrum analysis
C. Passive
D. Active ping

Correct Answer: B

Reference: https://support.ekahau.com/hc/en-us/articles/115004973067-Spectrum-Analysis-Surveys

 

QUESTION 2:

A customer called with a requirement that internal clients must be on different subnets depending on the building they are in. All-access points are operating in local mode and will not be modified, and this is a single controller solution.

Which design approach creates the desired result?

A. Create AP groups for each desired location, map the correct VLANs to the internal SSID, and add the access points for that location.

B. Create an SSID place it to the desired VLAN under WLANs and configure 802.1x in ISE to assign the correct VLAN based on the SSID from which the client is authenticating

C. Create FlexConnect groups, place the access points in and set the correct VLAN to SSID mapping based on location.

D. Create mobility anchors for the SSID and on the controller under the internal SSID create a foreign map to the desired VLAN based on location.

Correct Answer: A

Reference: https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/71477-ap-group-vlans-wlc.html

 

QUESTION 3:

A customer has two Cisco 550B WLCs that manage all the access points in their network and provide N+1 redundancy and load balancing. The primary Cisco WLC has 60 licenses and the secondary Cisco WLC has 40. The customer wants to convert the N+1 model to an HA model and provide SSO. Configuration must be performed during a maintenance window. After performing all the configurations on both controllers, the config redundancy unit secondary command is
issued on the secondary Cisco WLC and it fails.

Which parameter needs to be in place to complete the configuration?

A. A cable in the RP port
B. The secondary Cisco WLC needs a minimum of 50 base licenses
C. The primary Cisco WLC is already set as the secondary unit.
D. SSO needs to be enabled

Correct Answer: B

Reference:

 
QUESTION 4:

An engineer is designing a wireless deployment for a university auditorium. Which two features can be used to help deal
with the issues introduced by high AP count? (Choose two.)

A. TSPEC
B. RXSOP
C. TPC
D. LSS
E. DFS

Correct Answer: CE

Reference: https://www.cisco.com/c/en/us/support/docs/wireless-mobility/80211/200069-Overview-on-802-11h-Transmit-Power-Cont.html

 

QUESTION 5:

An engineer must repurpose a lab WLC appliance for use in the production environment of the enterprise. After the new WLC is configured with the information of the other WLC, the mobility tunnels are still not coming up. What is the reason?

A. A firewall is blocking UDP port 16667 between the WLCs.
B. The WLC management interfaces are in the same VLAN.
C. The hardware platform is incompatible.
D. The mobility groups are different.

Correct Answer: D

……

For the latest free sharing of 13 Cisco 300-425 exam questions and answers, click here for more

Latest Updates Cisco 300-425 Exam Practice Questions and Answers

QUESTION 1

A wireless engineer must optimize RF performance for multiple buildings with multiple types of construction and user
density. Which two actions must be taken? (Choose two.)
A. Configure FlexConnect groups for each building.
B. Configure WMM profiles for each building.
C. Configure AP groups for each area type.
D. Configure RF profiles for each area type.
E. Enable DTPC on the network.

Correct Answer: CD

QUESTION 2

examthings 300-425 q2

Refer to the exhibit. A client roams between two APs that are registered to two different controllers, where each
controller has an interface in the client subnet. Both controllers are running AireOS. Which scenario explains the client’s
roaming behavior?
A. Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is moved from
the original controller to the new controller.
B. Controllers do not exchange mobility control messages (over UDP port 16666) and the client database, entry is not
moved from the original controller to the new controller.
C. Controllers exchange mobility control messages (over UDP port 16666) and a new client session is started with the
new controller.
D. Controllers exchange mobility control messages (over UDP port 16666) and the client database entry is tunneled
from the original controller to the new controller.

Correct Answer: A

QUESTION 3

Which two considerations must a network engineer have when planning for voice over wireless roaming? (Choose two.)
A. Full reauthentication introduces gaps in a voice conversation.
B. Roaming time increases when using 802.1x + Cisco Centralized Key Management.
C. Roaming occurs when the phone has seen at least four APs.
D. Roaming occurs when the phone has reached -80 dBs or below.
E. Roaming with only 802.1x authentication requires full reauthentication.

Correct Answer: AE

QUESTION 4

A customer is running a guest WLAN with a foreign/export-anchor setup. There is one anchor WLC in the US and two in
Europe. Anchor WLC priorities are used to prefer local anchors. During a routine network audit, it is discovered that a
large number of guest client sessions in the US are anchored to the WLCs in Europe. Which reason explains this
behavior?
A. The foreign WLC failed and recovered.
B. The US anchor WLC failed and recovered.
C. The US anchor WLC is anchored to itself with a priority value of zero.
D. The anchor WLC is in the same mobility group.

Correct Answer: B

QUESTION 5

A high-density wireless network is designed. Which Cisco WLC configuration setting must be incorporated in the design
to encourage clients to use the 5 GHz spectrum?
A. Band Select
B. RRM
C. Cisco Centralized Key Management
D. load balancing

Correct Answer: A

QUESTION 6

An engineer must decide the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation
should be considered?
A. The edge of the cell should be -67 dBm.
B. The edge of the cell should be below 35 RSSI.
C. The measurement should be done on the 2.4-GHz band.
D. One AP should be deployed per 3000 square feet.

Correct Answer: A

QUESTION 7

During a client roaming event, which device is responsible for communicating the new Layer 2 EID mapping of a
wireless supplicant to the fabric domain?
A. WLC
B. BN
C. CP2
D. CP1

Correct Answer: A

QUESTION 8

Which non-Wi-Fi interferer can be identified by Metageek Chanalyzer?
A. PDAs
B. jammers
C. smartphones
D. printers

Correct Answer: B

QUESTION 9

An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients
will be assigned a subnet by location. Which type of groups can the engineer use to map the smaller subnets to the
corporate WLAN?
A. WLC port groups
B. RF groups
C. AP groups
D. interface groups

Correct Answer: D

QUESTION 10

DRAG DROP
Drag and drop the characteristics from the left onto the correct functionalities on the right.
Select and Place:

examthings 300-425 q10

Correct Answer:

examthings 300-425 q10-1

QUESTION 11

Multiple WLCs are implemented in a high-availability configuration in a mobility group. APS is deployed with only a
primary controller assigned. By default, which mobility group member controller do the orphaned APs join in the event of
a failed controller?
A. controller with the most available AP free license capacity
B. controller with the lowest percent of associated APs per license capacity
C. controller with the least CPU utilization over the last reporting period
D. controller with the least number of associated APs

Correct Answer: D

QUESTION 12

examthings 300-425 q12

Refer to the exhibit. Which two statements about Cisco Prime Infrastructure are true? (Choose two.)
A. It presents the recommended number of APs for the selected coverage area based on the selections made.
B. Planning mode requires a special license in Cisco Prime Infrastructure.
C. It shows the map editor feature in Cisco Prime Infrastructure.
D. Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.
E. It shows the planning mode feature in Cisco Prime Infrastructure.

Correct Answer: DE

QUESTION 13

A customer has noticed that Client Band Select is enabled and no clients are utilizing the 5 GHz band. Which three
parameters must be met to ensure that wireless clients use the 5 GHz band? (Choose three.)
A. Ensure that channel bonding is enabled on the WLAN.
B. Ensure that the co-channel interference has not exceeded -85 dBm.
C. Ensure that the UNII-2 extended channels are enabled on the 802.11a radios.
D. Ensure that the client is receiving RSSI above the minimum band select RSSI threshold.
E. Ensure that the client is dual-band capable.
F. Ensure that the WLAN has 802.11a enabled.

Correct Answer: CDE

Share lead4Pass Cisco 300-425 Coupon codes 2020

leads4pass coupon 2020

About leads4pass

leads4pass collaborates with several free blogs to share the latest effective exam exercise questions to help more people easily improve their exam skills and experience. leads4pass.com available(the most accurate IT exam study materials, 100% money-back guarantee, professional assistant, 100% Reliable!)

why leads4pass

Cisco 300-425 Exam Tips Summary:

Examthings freely share Cisco 300-425 exam dumps, 300-425 exam practice questions, 300-425 youtube video learning, 300-425 pdf, and official updates hope to help you successfully pass the exam!

ps.

  1. Latest update leads4pass 300-425 exam dumps:
    https://www.leads4pass.com/300-425.html (61 Q&As) [2022 Updated] Total Questions: 120 Q&A

2.[Q1-Q12 PDF] Free Cisco 300-425 pdf dumps download from Google Drive:
https://drive.google.com/file/d/115BAw_fNYCPCJi6wFjTK7_8axM7iSyxx/

[2022 updated]: https://drive.google.com/file/d/1gKXKHr_qnSyocSJs34EbGFVBsRdmRSlf/

Good luck!