Cisco is one of the largest information technology companies in the world. Joining Cisco and becoming a member of the best company is the dream of many people. To be a part of it, you must first get a certificate from Cisco. Next, I will recommend 2022 One of Cisco’s very popular programs: 300-410 ENARSI-Implementing Cisco Enterprise Advanced Routing and Services, if you can pass the exam, you will become a Cisco Enterprise Advanced Routing and Services Specialist. Then you can get high returns and social status.
Take the Cisco 300-410 Exam Program:
2022 New – Lead4Pass 300-410 ENARSI dumps include both PDF and VCE modes, any mode can help you pass the exam 100%: https://www.lead4pass.com/300-410.html (285 Q&A).
300-410 ENARSI exam questions and answers have been verified, 100% accurate, and effective.
Also: Take the 12 newly updated Cisco 300-410 ENARSI exam questions online test shared for free by Lead4Pass,
or download the Cisco 300-410 ENARSI PDF: https://drive.google.com/file/d/1rnvdHsDqyBGZ6_7PXDpDecCplDVNsbji/
Cisco 300-410 ENARSI Exam Questions Online Test
Please record your answers and verify them at the end of the article
Refer to the exhibit.
Redistribution is enabled between the routing protocols, and nowPC2 PC3, and PC4 cannot reach PC1. What are the
two solutions to fix the problem? (Choose two.)
A. Filter RIP routes back into RIP when redistributing into RIP in R2
B. Filter OSPF routes into RIP from EIGRP when redistributing into RIP in R2
C. Filter all routes except RIP routes when redistributing into EIGRP in R2.
D. Filter RIP AND OSPF routes back into OSPF from EIGRP when redistributing into OSPF in R2
E. Filter all routes except EIGRP routes when redistributing into OSPF in R3.
Even PC2 cannot reach PC1 so there is something wrong with RIP redistribution in R2. Because RIP has higher
Administrative Distance (AD) value than OSPF and EIGRP so it will be looped when doing mutual redistribution.
Refer to the exhibits.
When DMVPN is configured, which configuration allows spoke-to-spoke communication using loopback as tunnel
A. Configure crypto isakmp key cisco address 0.0.0.0 on the hub.
B. Configure crypto isakmp key Cisco address 18.104.22.168 255.255.0.0 on the hub.
C. Configure crypto isakmp key cisco address 22.214.171.124 255.255.0.0 on the spokes.
D. Configure crypto isakmp key cisco address 0.0.0.0 on the spokes.
Refer to the exhibit.
The engineer configured and connected Router2 to Router1. The link came up but could not establish a Telnet
connection to Router1 IPv6 address of 2001:DB8::1. Which configuration allows Router2 to establish a Telnet
connection to Router1?
A. jpv6 unicast-routing
B. permit ICMPv6 on access list INGRESS for Router2 to obtain IPv6 address
C. permit ip any any on access list EGRESS2 on Router1
D. IPv6 address on GigabitEthernet0/0
Which next hop is going to be used for 172.17.1.0/24 ?
Refer to the exhibit.
An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is
preferred if available. How is this issue resolved?
A. Use the icmp-echo command to track both default routes
B. Use the same AD for both default routes
C. Start IP SLA by matching numbers for track and ip sla commands
D. Start IP SLA by defining frequency and scheduling it
In the above configuration we have not had activated our IP SLA operation.
We can start it with this command:
R1(config)#ip sla schedule 100 life forever start-time now
Also we should specific the rate of ICMP echo:
R1(config-ip-sla-echo)#frequency 5 // Send ICMP echo every 5 seconds
Which technology uses the many-to-one method of mapping IP addresses?
A. static NAT
B. dynamic NAT
Which Ipv6 first-hop security feature helps to minimize denial of service attacks?
A. IPv6 Router Advertisement Guard
B. IPv6 Destination Guard
C. DHCPv6 Guard
D. IPv6 MAC address filtering
The Destination Guard feature helps in minimizing denial-of-service (DoS) attacks. It performs address resolutions only
for those addresses that are active on the link,and requires the FHS binding table to be populated with the help of the
IPv6 snooping feature.The feature enables the filtering of IPv6 traffic based on the destinationaddress, and blocks the
NDP resolution for destination addresses that are not found in the binding table. By default, the policy drops traffic
coming for an unknowndestination.
Refer to the exhibit. ISP 1 and ISP 2 directly connect to the Internet. A customer is tracking both ISP links to achieve
redundancy and cannot see the Cisco IOS IP SLA tracking output on the router console. Which command is missing
from the IP SLA configuration?
A. Start-time 00:00
B. Start-time 0
C. Start-time immediately
D. Start-time now
Which two statements about VRF-Lite configurations are true? (Choose two.)
A. They support the exchange of MPLS labels
B. Different customers can have overlapping IP addresses on different VPNs
C. They support a maximum of 512.000 routes
D. Each customer has its own dedicated TCAM resources
E. Each customer has its own private routing table.
F. They support IS-IS
Refer to the exhibit. When monitoring an IPv6 access list, an engineer notices that the ACL does not have any hits and
is causing unnecessary traffic to pass through the interface Which command must be configured to resolve the issue?
A. access-class INTERNET in
B. ipv6 traffic-filter INTERNET in
C. ipv6 access-class INTERNET in
D. ip access-group INTERNET in
An engineer is troubleshooting on the console session of a router and turns on multiple debug commands. The console screen is filled with scrolling debug messages that none of the commands can be verified if entered correctly or display any output.
Which action allows the engineer to see entered console commands while still continuing the analysis of the debug
A. Configure the term no mon command globally.
B. Configure the logging synchronous level all command.
C. Configure the logging synchronous command.
D. Configure the no logging console debugging command globally.
When configuring Control Plane Policing on a router to protect it from malicious traffic, an engineer observes that the
configured routing protocols start flapping on that device. Which action in the Control Plane Policy prevents this problem in a production environment while achieving the security objective?
A. Set the conform-action and exceed-action to transmit initially to test the ACLs and transmit rates and apply the
Control Plane Policy in the output direction
B. Set the conform-action and exceed-action to transmit initially to test the ACLs and transmit rates and apply the
Control Plane Policy in the input direction
C. Set the conform-action to transmit and exceed-action to drop to test the ACLs and transmit rates and apply the
Control Plane Policy m the input direction
D. Set the conform-action to transmit and exceed-action to drop to test the ACLs and transmit rates and apply the
Control Plane Policy m the output direction
Participate in the 2022 Cisco 300-410 ENARSI Exam Program to help you pass the exam 100%, get the full Cisco 300-410 ENARSI dumps:https://www.lead4pass.com/300-410.html (285 Q&A PDF+VCE)
P.S. Get a free Cisco 300-410 ENARSI PDF: https://drive.google.com/file/d/1rnvdHsDqyBGZ6_7PXDpDecCplDVNsbji/
Maybe you want to ask:
Can Lead4Pass help me pass the exam successfully?
Lead4Pass has a 99%+ exam pass rate, this is real data.
Is Lead4Pass 300-410 dumps latest valid?
Lead4Pass updates all IT certification exam questions throughout the year. Guaranteed immediate availability.
Is the Lead4Pass buying policy reliable?
In 2022, Lead4Pass has 8 years of exam experience, so don’t worry!
Is there a discount on Cisco 300-410?
Yes! You can google search, or check the discount code channel directly
For more questions, you can contact Lead4Pass customer service or send an email, and we will guarantee a reply within 24 hours.