Cisco 300-625 is a very popular exam. You can find us in Google Search “300-625 dumps“, “300-625 exam dumps“, “300-625 DCSAN dumps”, etc. Passing the Lead4Pass 300-625 exam dumps can help You easily pass the exam, lead4pass has a pass rate of over 99%, and has the latest authoritative exam experts. You can find the perfect exam policy in the Lead4Pass policy. Lead4pass 300-625 dump contains PDF and VCE. You can choose between the two modes. Lead4pass 300-625 certification dumps https://www.leads4pass.com/300-625.html (PDF+VCE).
Next, I will share free Cisco 300-625 certification dumps, you can take the exam test online. You can also get a free Cisco 300-625 Exam PDF.
Cisco 300-625 Exam PDF
Google Drive: https://drive.google.com/file/d/13ND6PIliZUc1X5H6c9xLNEClRkQ1rmAr/view?usp=sharing
Cisco 300-625 certification exam questions
Exam answers are announced at the end of the article
QUESTION 1
After a subordinate switch requests a domain ID form a principal switch, the requested domain ID becomes the runtime domain ID, and all interfaces on the affected VSAN are isolated. What is a solution to the issue?
A. Add the received ID to the allowed list.
B. Configure a static domain on the subordinate switch and reboot the switch.
C. Enable the FICON feature on the affected VSAN.
D. Configure IVR NAT on the affected VSAN.
QUESTION 2
Which result occurs when a VSAN is deleted that contains non-trunking ports?
A. The ports are moved to VSAN 4094.
B. The ports are moved to VSAN 1.
C. The ports are removed from the configuration.
D. The port configurations are cleared.
QUESTION 3
DRAG DROP
Drag and drop the boot issues from the left onto the correct solutions on the right.
Select and Place:
Correct Answer:
QUESTION 4
Which port mode is used on an NPV device to connect to an NPIV core switch?
A. E
B. F
C. N
D. NP
QUESTION 5
Which benefit of upgrading to the Cisco DCNM server-based advanced feature license for a Cisco MDS switch is
correct?
A. The license can be reassigned when a switch is replaced with a newer version within the same product family.
B. The license can be assigned to either server MAC address or switch serial number.
C. An unlimited number of devices can be added to the list of licensed devices.
D. The license can be reassigned when the switch is replaced with a Cisco Nexus switch.
QUESTION 6
A storage administrator is upgrading Cisco NX-OS on a Cisco MDS switch. The administrator performs an ISSU
upgrade following the configuration guide. While the install is proceeding, the administrator connects a new server to the switch, which cannot access storage. The existing servers continue to operate properly through the switch. Why is the new server failing to connect?
A. The fabric data plane resets as part of the upgrade process.
B. The new server is unable to log in to the fabric to receive an FC-ID.
C. The upgrade process disables any currently unused ports.
D. The zoning database is locked during the upgrade process.
QUESTION 7
Refer to the exhibit.
An engineer is configuring Inter-VSAN routing for two Cisco MDS switches. The FSPF cost between the switches is
500, and the Cisco MDS core virtualizes an IVR NAT domain as shown. Which statement about the topology is correct?
A. The MDS-Core simulates an IVR NAT, and the FSPF cost is 500.
B. The MDS-Core simulates an IVR NAT, and increases the cost to 501.
C. The MDS-Core simulates an IVR NAT, and decreases the cost to 400.
D. The MDS-Core simulates an IVR NAT, and increases the cost to 600.
QUESTION 8
What is the effect of a non-graceful virtual machine shutdown on a virtualized server that is connected to a SAN with
Fibre Channel interfaces?
A. NP Port reload connected to the upstream SAN switch
B. out-of-service Fibre Channel interfaces on the SAN switch
C. frames stuck in the storage system
D. frames stuck in the HBA buffer of the server
QUESTION 9
After user account attributes are modified in Cisco NX-OS, when do changes to the user\\’s session attributes take
effect?
A. immediately
B. at the scheduled time
C. when the user logs out of a session
D. when the user creates a new session
QUESTION 10
Which result occurs if a device alias is renamed and then the original device alias name is used in an add command in
the same session?
A. Both commands execute successfully.
B. The device alias is renamed and the add command is moved to the rejected list.
C. Both commands are moved to the rejected list.
D. The rename command is moved to the rejected list and the add command executes successfully.
QUESTION 11
Refer to the exhibit.
The san-user must configure FSPF on the VSAN 500, but fails. An operator with network administrative rights must
authorize the san-user to perform this work. Which configuration must the operator apply?
A. MDS-A(config)# role name sangroup MDS-A(config-role)# no rule 2
B. MDS-A(config)# role name sangroup MDS-A(config-role)# rule 4 permit config feature fspf
C. MDS-A(config)# role name sangroup MDS-A(config-role)# rule 2 permit config feature vsan
D. MDS-A(config)# role name sangroup MDS-A(config-role)# vsan policy deny MDS-A(config-role-vsan)# permit vsan
500
QUESTION 12
Which configuration is needed to enable manual ESP mode for Fibre Channel TrustSec on Cisco MDS switches?
A. MDS(config)# interface fc 1/1 MDS(config-if)# fcsp esp manual
B. MDS(config)# fcsp esp manual
C. MDS(config)# interface fc 1/1 MDS(config-if)# fcsp mode gcm MDS(config-if-fcsp)# fcsp esp manual
D. MDS(config)# interface fc 1/1 MDS(config-if)# fcsp esp manual MDS(config-if-fcsp)# mode gcm
QUESTION 13
Refer to the exhibit.
A user who is logged in as an operator cannot update the zoneset. What is the cause of this issue?
A. The fabric is locked by admin on switch-2.
B. Hard zoning is enabled.
C. Merge control is disabled.
D. The switch has a conflicting domain ID.
E. The fabric is locked by admin on another switch.
QUESTION 14
Which two protocols are used to implement SAN telemetry on Cisco MDS switches? (Choose two.)
A. RPC transport
B. GPB transport
C. gRPC transport
D. gRPC encoding
E. GPB encoding
QUESTION 15
A storage administrator is configuring inter-VSAN routing on a fabric that contains duplicate domain IDs. Which feature must be configured to ensure continued operation?
A. auto topology
B. transit VSANs
C. IVR NAT
D. virtual domains
Publish the answer
| Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 | Q9 | Q10 | Q11 | Q12 | Q13 | Q14 | Q15 |
| A | A | IMAGE | D | A | D | B | B | D | A | D | A | A | CE | C |
All free content comes from Lead4Pass for sharing, complete 300-625 exam questions and answers to help you successfully pass the exam: https://www.leads4pass.com/300-625.html
Cisco 300-625 Exam PDF
Google Drive: https://drive.google.com/file/d/13ND6PIliZUc1X5H6c9xLNEClRkQ1rmAr/view?usp=sharing
Free exam questions and answers, free exam PDFs, can help you improve your ability. But wanting to pass the Cisco 300-625 exam is not an easy task. Being able to take the exam for the first time and successfully obtain certification is something that every participant in the exam dreams of! Lead4Pass Cisco 300-625 certification dumps can guarantee a pass rate of more than 99%. And a safe policy guarantee. Finally, good luck is always with you! Please follow and share if you like it.
PS. Cisco has always been the most popular certification exam and contains many series of the exam content. At VceCert.com, we shared free dumps of all series